Manual Steel Bar Cutter (GQ60 5.5KW)
This machine is efficient for cutting off steel bar products on building construction ,such as ordinary carbon steel , cold and hot round steel , screw thread steel ,flat steel,angle steel and square steel . ( need to make knife) it's made of high steel knife seat and connecting shaft ,high speed international standard motor and firm reinforcing covering. This machine is small, solid, lubricant better,little power loss,operation easy,high efficiency,convenient for moving .
MOTOR TYPE (GQ50): Y112M-2 4kw
MOTOR TYPE (GQ40): Y100L-2 3kw
GEAR: Cast Steel
CRANKSHAFT: C45 steel
CONNECTION ROD: C45 steel
*The machine parts listed above have half year warranty.
BLADE: 65Mn Steel
*All the main components undergone the required heat treatment (quenching, tempering or high frequency).
The thread type and ADJUSTABLE STOP GAUGE ensure the ACCURACY and STABILITY of cutting operations.
The separation of the connecting rod from the gear enable the machine to UNDERTAKE HEAVY-DUTY WORKS.
Adopted THIGH and RESISTENT BLADES in order to ensure high efficency with all standards of steel bars without need to change them.
The adoption of the LARGE GEAR improve the driving speed as well as the working life.
The high cutting speed with the SIMPLIFIED SYSTEM increased performances of 50% more than normal cutters.
Worry-saving: The main components last for 10 years, and the wear parts can last for 3 years, so it wil cost you almost nothing for maintenance.
Time-Saving: The international advanced structure ensures the fastest cutting speed.
Labor-saving: One machine to cut different sizes of steel bar without changing the blade
| Steel bar cutter / steel cutting machine |
| Model |
GQ40 (with clutch) |
GQ50 (with clutch) |
GQ60 (with clutch) |
| Cutting rebar Dia (Plain Carbon Steel) |
6-40mm |
6-50mm |
6-60mm |
| IIgrade screw thread rebar Dia: |
6-32mm |
6-42mm |
6-50mm |
| Flat steel max. diameter: |
70×15mm |
80×18mm |
90x28mm |
| Cutting square steel max. spec(Q235A) |
32×32mm |
40×40mm |
50×50mm |
| Angle steel max. spec : |
50×50mm |
63x63mm |
73×73mm |
| Cutting quantity: |
32t/min |
28t/min |
28t/min |
| Motor spec: model: |
Y100L-2 3KW |
Y112M-2 4KW |
Y112M-2 5.5KW |
| Voltage / speed |
380V 2800rpm |
380V 2800rpm |
380V 2800rpm |
| Dimension: |
1190×450×680(mm) |
1280×480×720mm |
1380×580×820mm |
| Net weight: |
360kgs |
510kgs |
890kgs |
| Gross weight: |
415kgs |
535kgs |
920kgs |
| Packing size: |
1270×490×820mm |
1470×560×1010mm |
1570x700x1110mm |
| Recommendation for piece number of simultaneously cutting off steel bars with diameters smaller than φ22mm |
| Diameter of steel bar (mm) |
4~8 |
10~13 |
14~18 |
19~22 |
More than 22 |
Cutting off piece number each time
GQ40 |
6 |
5 |
3 |
2 |
1 |
| Cutting off piece number each time GQ50 |
8 |
5 |
4 |
3 |
2 |
1. Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
2. Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
3. What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
){kind=link}